Showing posts with label instrumentation. Show all posts
Showing posts with label instrumentation. Show all posts

Wednesday, November 3, 2010

Transmitter Basics

Definition
The major purpose of a transmitter is to measure a change in process variable from a remote location and to transmit it at required location. Transmitter is a device (electronic/pneumatic) which measure a process variable and converts it into standard, proportional signal. Standard signal can be pneumatic or electronic
Pneumatic signal is 3 to 15 psig while electronic signal is 4 to 20 ma. Transmitter has a supply of 24vdc for electronic and 20 psig for pneumatic

Principle of operation
The transmitter consist of a sensor part and a processing part. The sensor part create a primary change proportional to the process variable’s change. The processor part convert that change into a standard ouput signal. For example:

A process variable e.g pressure can be varied from 0 to 100 psig and we want to measure it and also we want to transmit it to a remote location. Then first off all range of transmitter is set to our required value (o to 100 psig). Then we will apply process variable at different values as 0%, 25%, 50%, 75%, 100%. The transmitter will generate a proportional out put as 4mA, 8 mA, 2 mA, 16mA, 20 mA or if we use pneumatic transmitter 3 psig, 6psig, 9psig, 12 psig, 15 psig respectively that out put signal can be transmitted to a remote location either it is electronic or pneumatic.

Saturday, October 2, 2010

Industrial Instrumentation and Control

Welcome Fellows!

In today's modern world, the top target of every plant management or plant ownership is to achieve the safest and maximum production out of their equipment, machinery and devices. In order to reach that target, one of the major steps it follows is to install good instrumentation in the plant. When we walk through a modern day plant, we find many transmitters, gauges, trolls, control valves, motors, solenoid valves etc. This is all nothing but Instrumentation.

But the fact is, that instrumentation can't do anything alone. It needs some brain that can constantly monitor the readings provided by it and takes actions accordingly to operate the final control elements like valves, motors etc. At the same time, these actions must ensure to operate these devices at optimal parameters as to ensure their health and long-life. This is where the world of control comes in.

Control System enables the instrumentation to operate in a way to give you the safest and optimum production. Nowadays, it is fully automatic. Once configured, it brings your whole plant over the screens of control room.

This blog has been developed in order to discuss about these two greatest technologies of industrial plants. We will be sharing our experiences, our ideas and our observations. We invite you to be the part of it to contribute it to be the world's best resource of learning and sharing the experiences of instrumentation and control.

Lets control it now!

Regards

SB